Skip to content

 

How to Backwash Your Sand Filter 🏊‍♂️💦

1. Turn Off the Pool Pump

  • Always start by switching off the pump to avoid damaging your system during the process.

2. Set the Filter Valve to "Backwash"

  • Locate the multiport valve on your filter and turn it to the "Backwash" position. Make sure the handle is securely locked in place.

3. Connect the Waste Hose (If Needed)

  • Attach the backwash hose to the waste port if your filter system doesn’t have a built-in backwash drain. Make sure the hose is directed to an appropriate drainage area.

4. Turn On the Pump

  • Turn the pump back on and let it run for 2-3 minutes, or until the water flowing out of the waste line becomes clear. You can check this using the sight glass on the filter, if available.

5. Turn Off the Pump Again

  • Once the water runs clear, switch off the pump before moving to the next step.

6. Set the Valve to "Rinse"

  • Turn the multiport valve to the "Rinse" setting. This helps resettle the sand and flush out any remaining debris.

7. Turn the Pump Back On

  • Run the pump on "Rinse" for about 30 seconds to 1 minute to ensure the filter is clean and ready to return to normal operation.

8. Turn Off the Pump Once More

  • After rinsing, turn the pump off and return the multiport valve to the "Filter" position.

9. Turn the Pump Back On

  • Switch the pump back to "Filter" mode and let it resume normal operation.

10. Check the Pressure Gauge

  • Verify that the pressure gauge is back in the normal range. If the pressure is still high, repeat the backwashing process or check for other issues like clogged lines.

Pro Tips 🌟

  • Backwash your filter when the pressure gauge reads 8-10 PSI higher than the normal operating range.
  • Avoid over-backwashing; too much can waste water and affect your filter’s efficiency.
  • Regularly inspect the sand (every 3–5 years) and replace it if it’s worn out.

With this process, your sand filter will be working like a charm, keeping your pool crystal-clear! Let me know if you’d like me to adjust this further or add creative touches! 🏊‍♀️✨

 

Check out our latest blog post

Contact us

Smarter Pools