Top 5 Tips When Your Pool Pump Loses Prime 🚨💦

Is your pump basket looking lonely without water? Don’t worry—we’ve got you covered! Here are five quick and creative tips to get your pump back in action:

1. Check Your Water Level 🌊

• Look at your pool’s waterline—is it too low? Your water should be at least halfway up the skimmer opening to keep things flowing smoothly.

• Quick Fix: Top off your pool with a hose and give your pump another try.

2. Inspect the Pump Basket Lid 🔍

• Take a peek under the pump basket lid. Is the gasket (O-ring) dirty, cracked, or out of place? An airtight seal is key to keeping your pump primed.

• Pro Tip: Clean the gasket and apply a thin layer of pool-safe lubricant for a snug fit.

3. Clear the Baskets 🧹

• Debris in your pump basket or skimmer can block water flow and cause your pump to lose suction.

• DIY: Turn off the pump, clean out the baskets, and remove any blockages to restore water flow.

4. Check for Air Leaks 🛠️

• Air leaks are sneaky troublemakers! Inspect your pump and suction line for loose connections or cracks.

• Hose Hack: Run water over the fittings while the pump is on. If it starts priming, you’ve found the leak! Seal it up to fix the issue.

5. Reprime the Pump 🔄

• Sometimes, all your pump needs is a little water love.

• How-To: Turn off the pump, open the lid, and fill the pump basket with water using a garden hose. Replace the lid tightly and restart the pump. Watch that water flow!

If none of these tips do the trick, it might be time to call in the pros. Complex issues like clogged suction lines or pump malfunctions need expert care! 🛠️

Keep your pump happy, and your pool will stay sparkling! ✨